Removal Procedure
- Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection.
- Remove the radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement.
- For access to the left park/turn signal lamp, release the air cleaner cover retaining clips (1).
- Detach and move the air cleaner upper cover (1) rearward.
- For access to the right park/turn signal lamp, disconnect the coolant recovery hose (2) from the coolant recovery reservoir filler neck (1).
- Remove the coolant recovery reservoir filler neck (1).
- Remove the park/turn signal lamp socket (2) from the headlamp assembly (1).
- Remove the park/turn signal lamp bulb (2) from the park/turn signal lamp socket (1).
Caution: Refer to Battery Disconnect Caution in the Preface section.
Important:
• For left park/turn signal lamp access, go to step 3. • For right park/turn signal lamp access, go to step 5.
Important: Remove the coolant recovery reservoir filler neck by pulling upwards. Allow the coolant recovery reservoir filler neck to drain before completely removing it from the vehicle.
Important: Place a clean workshop cloth over the opening of the coolant recovery reservoir immediately after removing the coolant recovery reservoir filler neck to prevent contamination of the coolant.
Important: Rotate the park/turn signal lamp socket (2) counter-clockwise to remove.
Important: Rotate the park/turn signal lamp bulb (2) counter-clockwise to remove.
Installation Procedure
- Install the park/turn signal lamp bulb (2) to the park/turn signal lamp socket (1).
- Install the park/turn signal lamp socket (2) to the headlamp assembly (1).
- Reposition the air cleaner upper cover and secure the air cleaner cover retaining clips (1).
- Install the coolant recovery reservoir filler neck (1) into the coolant recovery reservoir (3).
- Connect the coolant recovery reservoir hose (2) to the coolant recovery reservoir filler neck (1)
- Install the radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement.
- Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection.
- Check all vehicle lights for correct operation.
Important: Push and rotate the park/turn signal lamp bulb (2) clockwise to install.
Important: Rotate the park/turn signal lamp socket (2) clockwise to install.
Important: Ignore step 3 if access to the right park/turn signal lamp bulb was required.
Important: Ignore steps 4 and 5 if access to the left park/turn signal lamp bulb was required.
Important: Align the tab and keyway (2) and push the coolant recovery reservoir filler neck (1) down into the coolant recovery reservoir (3).
