Removal Procedure
- Detach the rearview mirror trim (4)
from the headliner by gently sliding downward.
- Disconnect the electrical connector (2) from the back of the rearview
mirror (1).
- Adjust the rearview mirror (1) to the full upright position.
- At the rearview mirror assembly base, remove the rearview mirror assembly
to windscreen retaining screw (3)
Important: Slide the rearview mirror assembly (1)
upward to remove from the retaining plate (2).
- Remove the rearview mirror assembly (1) from the vehicle.
Installation Procedure
Important: Position the center of the rearview mirror
assembly (1) at the top of the retaining plate (2).
- Install the rearview mirror assembly (1) to the vehicle.
- Install the rearview mirror assembly to windscreen retaining plate retaining
screw (3).
Tighten
Tighten the screw to 2 N.m (18lb in)
- Connect the electrical connector (2) to the mirror assembly (1).
- Attach the rearview mirror trim (4) to the headliner by gently
sliding upward.
- Reposition the mirror assembly (1).
- Calibrate the mirror compass. Refer to
Control Module References.