Step | Action | Yes | No | ||||
|---|---|---|---|---|---|---|---|
1 | Did you review the General Description and perform the necessary inspections? | Go to Step 2 | Go to Trim Height Specifications . | ||||
2 |
Important: Verify the vehicle suspension package RPO. Verify that the ride is too soft or too hard. Does the vehicle ride normally? | System OK | Go to Step 3 | ||||
3 | Inspect the tyres for the correct inflation pressure. Refer to Tire Inflation Pressure Specifications. Is the tyre inflation pressure correct? | Go to Step 4 | Go to Step 6 | ||||
4 | Inspect the vehicle trim height. Refer to Trim Height Inspection. Is the vehicle trim height correct? | Go to Step 5 | Go to Step 7 | ||||
5 | Inspect the following suspension components for wear or damage:
Are any of the components the worn or damaged? | Go to Step 8 | Go to Strategy Based Diagnosis in General Information. | ||||
6 | Inflate the tyres to the correct pressure. Did you complete the repair? | Go to Step 9 | -- | ||||
7 | Replace the suspension components as necessary. Did you complete the repair? | Go to Step 9 | -- | ||||
8 | Replace all of the worn or damaged components.
Did you complete the repair? | Go to Step 9 | -- | ||||
9 | Drive the vehicle in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
