- Install the battery (2) to the vehicle.
Important: Replacement batteries may require the vent
plug to be removed.
Important: Make sure that the vent hole that is not
used is sealed with a vent plug.
- Attach the battery vent hose (1) to the battery (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the battery retainer plate (2), locate the retainer strap to the retainer
plate and install the battery retainer strap nut (1).
Tighten
Tighten the nut to 18 N·m (13 lb ft).
- Connect the battery positive cable (2) to
the battery.
Tighten
Tighten the nut to 17 N·m (13 lb ft).
- Connect the battery negative cable (1). Refer to
Battery Negative Cable Disconnection and Connection.
Tighten
Tighten the nut to 17 N·m (13 lb ft).
- Install the cargo area centre carpet. Refer to
Rear Compartment Side Trim Panel Replacement
- Instal the left-hand side cargo area trim. Refer to
Rear Compartment Floor Panel Carpet Replacement
- Close rear compartment lid.