Removal Procedure
- Pull the assist handle (3) into the down position.
- Prise open the assist handle screw covers (1).
- Remove the two retaining torx screws (2).
Important: When removing the assist handle assembly,
take care not to damage the locating pins.
- Remove the assist handle assembly (3).
Installation Procedure
- Install the assist handle assembly (3) ensuring that
the locating pins are correctly aligned with the locating holes and spacer behind
the headlining.
- Install the assist handle retaining screws (2).
Tighten
Tighten the assist handle retaining screws to 2.0 N·m
(18 lb in).
- Close the assist handle screw covers (1).