The sunroof control is located between the sun visors. It works when the ignition is in ON/RUN or ACC/ACCESSORY. The sunroof will not operate after the engine is turned off.
From the closed position , turn the control clockwise to one of the six open positions. The sunshade opens with the sunroof.
Tilt the sunroof by turning the control counter-clockwise.
The sunroof will not move to the selected position or tilt position unless the switch is pressed and held. Once released, the sunroof will not operate. Press again to continue to a selected position.
Obstruction Detection
When the sunroof encounters an obstruction while closing, it immediately returns to the fully open or tilt position. The sunroof will not move again until the control is pressed upward, or a different position is selected.
