GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake

Removal Procedure
  1. Turn the ignition OFF.

    2. Object Number: 1949767 Size: SH
  2. Remove the camshaft position (CMP) sensor electrical connector (1) from the CMP sensor (2).

    3. Object Number: 1949769 Size: SH
  3. Remove the CMP sensor to engine front cover retaining bolt (1).
  4. Remove the CMP sensor from the engine front cover (2).

Installation Procedure

    Object Number: 1949769 Size: SH
  1. Install the CMP sensor (2) to the engine front cover.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the CMP sensor to engine front cover retaining bolt (1) and tighten to 10 N·m (89 lb in).

    3. Object Number: 1949767 Size: SH
  3. Install the CMP sensor electrical connector (1) to the CMP sensor.