GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2009
🢒
G8
🢒
Preface
🢒
Dangers, Warnings, and Cautions
🢒 Instrument Panel Center Trim Panel Replacement
Removal Procedure
Remove the knee bolster. Refer to
Knee Bolster Replacement
.
Remove the instrument panel compartment. Refer to
Instrument Panel Compartment Replacement
.
Remove the radio fascia. Refer to
Driver Information Display Replacement
.
Remove the I/P upper trim panel (1) by disengaging the trim panel retaining clips (2) and removing the I/P upper trim panel from the I/P pad (3).
Remove the centre trim panel to I/P pad retaining screws (1).
Remove the centre trim panel to I/P retaining screws (1).
Remove the centre trim panel storage bin to console retaining screws (2).
Remove the centre trim panel storage bin (3).
Disengage the centre trim panel to I/P pad retaining clips, located at the top of the centre trim panel (4).
Remove the trim panel.
Installation Procedure
Align the centre trim panel (4) with the I/P.
Engage the centre trim panel to I/P pad retaining clips, located at the top of the centre trim panel (4).
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the centre trim panel to I/P retaining screws (1) and tighten to
2 N·m (18 lb in)
.
Install the centre trim panel storage bin (3).
Install the centre trim panel storage bin to console retaining screws (2) and tighten to
2 N·m (18 lb in)
.
Install the top trim panel to I/P pad retaining screws (1) and tighten to
2 N·m (18 lb in)
.
Install the trim panel top cover (1) by engaging the trim panel retaining clips (2) and securing it to the I/P pad.
Ensure the trim panel (1) is flush with the I/P pad.
Install the I/P trim panel. Refer to
Instrument Panel Trim Panel Replacement
.
Install the radio fascia. Refer to
Driver Information Display Replacement
.
Install the instrument panel compartment. Refer to
Instrument Panel Compartment Replacement
.
Install the knee bolster. Refer to
Knee Bolster Replacement
.