GM Service Manual Online
For 1990-2009 cars only

Radio Front Speaker Replacement Tweeter

Removal Procedure - Tweeter


    Object Number: 1957841  Size: SH
  1. Remove the left instrument panel (I/P) defroster grille. Refer to Defroster Grille Replacement.
  2. Remove the tweeter speaker to I/P attaching screw (2).
  3. Disconnect the electrical connector (3).

Installation Procedure - Tweeter


    Object Number: 1957841  Size: SH
  1. Connect the electrical connector (3).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the tweeter speaker to I/P attaching screw (2) and tighten to 2 N·m (18 lb in).
  4. Install the left instrument panel defroster grille. Refer to Defroster Grille Replacement.

Removal Procedure - Center


    Object Number: 1957842  Size: SH
  1. Remove the instrument panel (I/P) defroster grilles. Refer to Defroster Grille Replacement.
  2. Remove the upper I/P center trim. Refer to Instrument Panel Upper Trim Panel Replacement.
  3. Remove the centre speaker to instrument panel attaching screws (2).
  4. Disconnect the electrical connector (3).

Installation Procedure - Center


    Object Number: 1957842  Size: SH
  1. Connect the electrical connector (3).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the center speaker to instrument panel attaching screws (2) and tighten to 2 N·m (18 lb in).
  4. Install the upper I/P center trim. Refer to Instrument Panel Upper Trim Panel Replacement.
  5. Install the instrument panel defroster grilles. Refer to Defroster Grille Replacement.

Radio Front Speaker Replacement Center

Removal Procedure


    Object Number: 1957842  Size: SH
  1. Remove the instrument panel (I/P) defroster grilles. Refer to Defroster Grille Replacement.
  2. Remove the upper I/P center trim. Refer to Instrument Panel Upper Trim Panel Replacement.
  3. Remove the centre speaker to instrument panel attaching screws (2).
  4. Disconnect the electrical connector (3).

Installation Procedure


    Object Number: 1957842  Size: SH
  1. Connect the electrical connector (3).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the center speaker to instrument panel attaching screws (2) and tighten to 2 N·m (18 lb in).
  4. Install the upper I/P center trim. Refer to Instrument Panel Upper Trim Panel Replacement.
  5. Install the instrument panel defroster grilles. Refer to Defroster Grille Replacement.