GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Sunshade Replacement

Removal Procedure

    Object Number: 1939834 Size: SH
  1. Detach the sunshade assembly (2) from the sunshade support (1) and rotate to gain access.
  2. Remove the retaining screw (3) attaching the sunshade assembly to the head lining assembly.

    3. Object Number: 1939839 Size: SH
  3. Pull the sunshade assembly (2) away from the roof lining assembly and disconnect the sun shade assembly electrical connection (1).
  4. Remove the sunshade assembly (2). The right side is shown, the left side is the same.

    5. Object Number: 1939836 Size: SH

    Note: Take care not to loose the sunshade support retaining mechanism and spring.

  5. Remove the retaining pin (1) attaching the sunshade support (2) to the sunshade retainer.
  6. Remove the sunshade support.

Installation Procedure

    Object Number: 1939840 Size: SH

    Note: When installing the sunshade, ensure the pivot line is vertical.

  1. Install the sunshade support (2) by inserting the sunshade support retaining pin (1).

    2. Object Number: 1939839 Size: SH
  2. Connect the sun shade assembly (2) electrical connector (1).

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1939845 Size: SH
  3. Rotate the sunshade assembly (2) and install it into the sunshade support (1) and tighten to 2.0 N·m (18 lb in).
  4. Install the sunshade assembly (2) into the sunshade support (1).
  5. Test sunshade for correct operation.