Rear Toe Adjustment for Pontiac GTO 2004

1. Measure the wheel alignment. Refer to Wheel Alignment Measurement .




Important: The following components have left-hand threads:

•	The inner adjustment link (5)

•	The inner lock nut (2)

•	The corresponding end of the adjuster (3)

2. Loosen the 2 lock nuts (2, 4) on the rear adjustment link assembly.
3. Rotate the center adjuster in order to adjust the rear toe to the specification. Refer to Wheel Alignment Specifications .

Increasing the length of the adjustment link assembly will increase the rear wheel toe.

4. Use a wrench on the hexagonal crimped section of the outer adjustment link (9) in order to hold the position of the ball joint.

Notice: Refer to Fastener Notice in the Preface section.

5. Tighten the 2 lock nuts.

Tighten
Tighten the 2 lock nuts to 50 N·m (37 lb ft).