Clutch Pedal Engine Start Switch Replacement for Pontiac GTO 2004

1. Disable the supplemental inflatable restraints (SIR) system. Refer to SIR Disabling and Enabling in SIR.
2. Remove the left instrument panel (I/P) lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.



3. Disconnect the clutch pedal start switch harness electrical connector (1) from the clutch switch (2).
4. Rotate the clutch pedal start switch (2) counterclockwise a quarter turn, then remove the switch from the pedal bracket assembly.

1. Install the switch in the pedal bracket assembly, then rotate the clutch pedal start switch (2) clockwise a quarter turn to the locked position.
2. Connect the clutch pedal start switch electrical connector to the clutch switch (2).
3. Install the instrument panel driver knee bolster. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
4. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.