GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Engine 🢒 Engine Electrical 🢒 Transmission Fluid Filler Tube and Seal Replacement

Removal Procedure

    Object Number: 208436 Size: SH
  1. Lift the fluid level indicator handle lock up.

    2. Object Number: 208423 Size: SH
  2. Remove the fluid level indicator.

    3. Object Number: 208459 Size: SH
  3. Remove the bolt attaching the fill tube to the cylinder head.

    4. Object Number: 165576 Size: SH
  4. Remove the fill tube and seal from the transmission.

Installation Procedure

    Object Number: 165576 Size: SH
  1. Insert the seal into the automatic transmission case hole.
  2. Install the fill tube to the transmission.

    3. Object Number: 208459 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the transmission bolt attaching the fill tube to the cylinder head.

    4. Tighten
    Tighten the fill tube bolt to 30 N·m (22 lb ft).


    Object Number: 208423 Size: SH
  4. Check the transmission fluid level.
  5. Fill the transmission to the proper level with DEXRON® III transmission fluid. Refer to Transmission Fluid Check .

    6. Object Number: 208436 Size: SH
  6. Push the fluid level indicator handle lock down.