GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Steering 🢒 Power Steering System 🢒 Engine Protection Shield Replacement

Removal Procedure
  1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 1302128 Size: SH
  2. Remove four engine protection shield bolts (1), then the engine protection shield.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1302128 Size: SH
  1. Install engine protection shield, and secure with the four engine protection shield bolts (1).

    2. Tighten
    Tighten the engine protection shield bolts to 30 N·m (22 lb ft).

  2. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.