Tools Required

1. Remove the fuel rail covers from the engine.
2. Install J 41803 and J 28467-B and support the engine.
3. Remove the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side in Engine Exhaust.
4. Remove the engine mount nuts.
5. Remove the engine mount.

1. Install the engine mount.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the engine mount nuts.

Tighten
Tighten the engine mount nuts to 80 N·m (59 lb ft).

3. Install the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side in Engine Exhaust.
4. Remove J 41803 and J 28467-B from the engine.
5. Install the fuel rail covers to the engine.