GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Preface 🢒 Cautions and Notices 🢒 Windshield Wiper and Washer Switch Replacement

Removal Procedure

    Object Number: 1380057 Size: SH
  1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  2. Disconnect the wiper control switch harness connector (1) by depressing the harness retaining tab and pulling the connectors apart.

    3. Object Number: 1380060 Size: SH
  3. Press the 2 tabs (1) that retain the wiper control switch (2) to the column (3).

    4. Object Number: 1380062 Size: SH
  4. Lift up the wiring harness connector retaining tabs on each side of the wiper control switch and pull the connector (1) from the switch.
  5. Remove the wiper switch assembly.

Installation Procedure

    Object Number: 1380062 Size: SH
  1. Connect the wiper control switch connector (1).

    2. Object Number: 1380060 Size: SH
  2. Install the wiper switch (2) to the column (3) making sure the retaining tabs (1) are engaged.

    3. Object Number: 1380057 Size: SH
  3. Connect the wiper control switch harness connector (1).
  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .