IPC Replacement and Programming - keywords center exchange
| Subject: | IPC Replacement and Programming |
| Models: | 2004-2006 Pontiac GTO |
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern:
Replacing the IPC on the GTO.
Recommendation/Instructions:
Order The IPC from the AJR International Inc. at 1-800-232-3965. Supply the Vehicle mileage to AJR to be inputted into the IPC.
After installing the IPC, the IPC must be programmed using the Tech 2. Build the Vehicle > Diagnosis > Select Model Year > Passenger Car > Pontiac > V body > Body > Instrument Panel Cluster > Special functions > Programming > Fuel Gage Calibrations > Select enter and the fuel gauge will calibrate.
Next, select Instrument Configuration. Select enter
Select tire pulses and enter 6132.
Next, select automatic or manual transmission. Depress the soft key to save the settings.
Exit out and remove scan tool. If the IPC is not programmed, there will be a message displayed on the DIC Program IPC.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
