GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Body Front End 🢒 Hood Open Assist Rod Replacement

Removal Procedure

    Object Number: 1234193 Size: SH

    Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

  1. Open and support the hood.
  2. Use a small flat-bladed tool to remove the retainer clip (1) on the assist rod (6).
  3. Remove the bolts (5) that attach the assist rod (6) to the fender.
  4. Disconnect the assist rod (6) from the hood strut pin (2) and remove.
  5. Remove the hood strut pin (2) and washer (4) from the hood (3), if necessary.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1234193 Size: SH
  1. Install the hood strut pin (2) and washer (4) to the hood (3), if removed.

    2. Tighten
    Tighten the hood strut pin to 18 N·m (13 lb ft).

  2. Connect the assist rod (6) to the hood strut pin (2).
  3. Install the bolts (5) that attach the assist rod (6) to the fender.

    4. Tighten
    Tighten the assist rod bolts to 12 N·m (106 lb in).

  4. Install the retainer clip (1) to the assist rod (6).
  5. Remove the support from the hood.
  6. Close the hood.