GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Door Lock Rod Knob Replacement

Removal Procedure

    Object Number: 1350911 Size: SH

    Important: The door locking knob retainer (2) must be replaced with a new one once removed.

  1. Remove the inside door handle, if required. Refer to Door Inside Handle Replacement .
  2. Using a small flat-bladed tool, remove the door locking rod knob retainer (2) from the door locking rod knob assembly (1).
  3. Lift the locking rod knob (1) up, and remove it form the door locking rod.
  4. Remove the screw (3) securing the door locking rod ferrule (4) to the door trim panel and remove the ferrule (4).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1350911 Size: SH
  1. Install the door locking rod ferrule (4) to the door trim panel and secure with the screw (3).

    2. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  2. Install the lock rod knob (1) to the door lock rod.
  3. Install a new lock rod knob retainer (2) to the door lock rod knob (1).
  4. Install the inside door handle, if removed. Refer to Door Inside Handle Replacement .