Removal Procedure
- Remove the screw (3) attaching the left console trim panel to the floor
console (2).
- Remove the knee bolster trim panel. Refer to
Driver Knee Bolster Replacement
.
- Remove the 2 screws (1) attaching the left console trim
panel to the instrument panel.
- Remove the left console trim panel from the floor console.
Installation Procedure
- Install the left console trim panel to the floor console.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 screws (1) attaching the left console trim panel
to the instrument panel.
Tighten
Tighten the 2 screws (1) to 2 N·m (18 lb in).
- Install the knee bolster trim panel. Refer to
Driver Knee Bolster Replacement
.
- Install the screw (3) attaching the left console trim panel to
the floor console (2).
Tighten
Tighten the screw (3) to 2 N·m (18 lb in).