Removal Procedure
- Open the instrument panel compartment door.
- Remove the 2 screws (3) attaching the right console trim
panel (2) to the instrument panel.
- Pull the rear of the right console trim panel (2) downward to disengage
it from the floor console retaining clip (1).
- Remove the right console trim panel (2) from the floor console.
Installation Procedure
- Install the right console trim panel (2)
to the floor console making sure the floor console retaining clip (1) is engaged.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 screws (3) attaching the right console trim panel (2)
to the instrument panel.
Tighten
Tighten the 2 screws (3) to 2 N·m (18 lb in).
- Close the instrument panel compartment door.