GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Cluster Trim Panel Replacement

Removal Procedure

    Object Number: 1360211 Size: SH
  1. Release the steering column adjustment lever, move the column to its lowers position and lock into place with the adjustment lever.
  2. Remove the two screws (3) attaching the instrument cluster trim panel (2) to the instrument panel.
  3. Tilt the top of the cluster trim panel (2) away from the instrument panel and disengage the retaining clips (1) on each side.
  4. Unhook each retaining lug (4) from the instrument panel.
  5. Disconnect the wiring connector from the fuel filler door release switch.
  6. Remove the cluster trim panel (2) from the instrument panel.
  7. Remove the fuel filler door release switch, if necessary. Refer to Fuel Tank Filler Door Lock Release Switch Replacement in Body Rear End.

Installation Procedure

    Object Number: 1360211 Size: SH
  1. Install the fuel filler door release switch, if removed. Refer to Fuel Tank Filler Door Lock Release Switch Replacement in Body Rear End.
  2. Connect the wiring connector to the fuel filler door release switch.
  3. Install the cluster trim panel (2) to the instrument panel, making sure the retaining lugs (4) and the retaining clips (1) are engaged.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the two screws attaching the instrument cluster trim panel (2) to the instrument panel.

    5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Move the steering column back to it's original position.