Removal Procedure
- Remove the center console end panel (1).
Refer to
Center Console End Panel Replacement
.
- Disconnect the electrical connector (4), if equipped.
- Remove the liner (2) from the console end panel storage compartment (3).
- Remove the 2 screws (5) attaching the console end panel
storage compartment (3) to the center console end panel (1).
- Tilt the storage compartment (3) downwards slightly and disengage
the 2 retaining tabs (6) from beneath the compartment (3) and
remove.
Installation Procedure
- Install the storage compartment (3)
to the center console end panel (1) making sure the 2 retaining tabs (6)
are engaged.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 screws (5) attaching the storage compartment (3)
to the center console end panel (1).
Tighten
Tighten the screws (5) to 2 N·m (18 lb in).
- Install the liner (2) to the storage compartment (3).
- Connect the electrical connector (4), if equipped.
- Install the center console end panel (1). Refer to
Center Console End Panel Replacement
.