GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Lighting Systems 🢒 Dome Lamp Replacement

Removal Procedure

    Object Number: 1379609 Size: SH
  1. Remove the dome lamp lens (1) from the dome lamp bezel using a small flat bladed tool as a lever on the right side of the dome lamp lens.
  2. Remove the two screws (2) securing the lamp assembly.
  3. Pull the lamp assembly down and disconnect the wiring harness connector from the lamp assembly.

Installation Procedure

    Object Number: 1379609 Size: SH
  1. Connect the wiring harness connector to the lamp assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Position the lamp assembly to the headliner.
  3. Install the two screws (2) securing the lamp assembly to the headliner.

    4. Tighten
    Tighten the two screws to 2 N·m (18 lb in).

  4. Install the dome lamp lens (1) to the dome lamp bezel.