Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you review the Lighting System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the hazard lamps are always ON. Does the system operate normally? | Go to Testing for Electrical Intermittents in Wiring Systems | Go to Step 3 |
3 | Disconnect the hazard lamp switch. Did the hazard lamps turn OFF? | Go to Step 7 | Go to Step 4 |
4 |
Is a ground present? | Go to Step 5 | Go to Step 6 |
5 | Repair the short to ground in the signal circuit between the switch and the relay. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 8 | -- |
6 | Replace the flasher relay. Refer to Relay Replacement in Wiring Systems. Did you complete the repair? | Go to Step 8 | -- |
7 | Replace the hazard lamp switch. Refer to Hazard Warning Switch Replacement . Did you complete the repair? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
