Removal Procedure
- Remove the 3 screws (1) attaching the instrument
panel outer cover (2) to the instrument panel.
- Remove the instrument panel outer cover (2) by rotating outward
to disengage the ventilation ducts.
Installation Procedure
- Install the instrument panel outer cover (2) to
the instrument panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 3 screws (1) attaching the instrument panel outer
cover (2) to the instrument panel.
Tighten
Tighten the screws to 2 N·m (18 lb in).