GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Wiring Systems 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure

    Object Number: 1554269 Size: SH
  1. Disconnect the electrical connector from the evaporative emission (EVAP) purge solenoid (1).
  2. Disconnect the EVAP purge pipe (2) by squeezing the retaining clip and pulling the hose from the solenoid.
  3. Disconnect the engine vacuum pipe (3) from the purge solenoid.

    4. Object Number: 1554270 Size: SH
  4. Remove the bolt (2) from the EVAP purge solenoid mounting bracket and remove the EVAP purge solenoid valve (1).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1554270 Size: SH
  1. Install the bolt (2) to the EVAP purge solenoid mounting bracket and install the EVAP purge solenoid valve (1).

    2. Tighten
    Tighten the bolt to 5 N·m (44 lb in).


    Object Number: 1554269 Size: SH
  2. Install the EVAP purge pipe (2) by squeezing the retaining clip and pulling the hose from the solenoid.
  3. Install the engine vacuum pipe (3) from the purge solenoid.
  4. Install the electrical connector from the EVAP purge solenoid (1).