Electronic Brake Control Module Replacement for Pontiac GTO 2006

1. Remove the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement .



2. Remove 4 bolts (1) from the electronic brake control module (EBCM).
3. Remove the EBCM (2) from the BPMV (3).

1. Align and install the EBCM (2) to the brake pressure modulator valve (3).

Notice: Refer to Fastener Notice in the Preface section.




2. Secure the EBCM with 4 bolts in the sequence shown.

Tighten
Tighten the EBCM bolts to 2 N·m (17 lb in), then to 3 N·m (26.5 lb in).

3. Install the BPMV. Refer to Brake Pressure Modulator Valve Replacement .
4. Using the scan tool, perform the System Configuration under the ABS Special Functions menu.