Removal Procedure
- Remove the instrument panel outer cover. Refer to
Instrument Panel Outer Trim Cover Replacement
.
- Remove the screw (1) attaching each windshield
defroster grille (2) to the instrument panel.
- Carefully unclip the defroster grille (2) at an angle and remove
from the instrument panel.
Installation Procedure
- Install the windshield defroster grille (2) to
the instrument panel, making sure the retainer clips are fully engaged.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 3 screw (1) attaching the windshield defroster grille (2)
to the instrument panel.
Tighten
Tighten the screw to 2 N·m (18 lb in).
- Install the instrument panel outer cover. Refer to
Instrument Panel Outer Trim Cover Replacement
.