GM Service Manual Online
For 1990-2009 cars only

Caution: To help avoid personal injury, always use jack stands when you are working on or under any vehicle that is supported only by a jack.

Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

Before you begin any lifting procedure, ensure the vehicle is on a clean, hard, level surface. Ensure all the lifting equipment meets weight standards and is in good working order. Ensure all the vehicle loads are equally distributed and secure. If you are only supporting the vehicle at the frame side rails, ensure the lifting equipment does not put too much stress on or weaken the frame side rails.

If you use any other lifting methods than those called out, use care to not damage the fuel tanks, the exhaust system or the underbody.

Vehicle Lifting and Jacking Locations


Object Number: 1356716  Size: MF
(1)Suspension Contact Hoist Lifting Locations
(2)Preferred Frame Contact Lifting and Jacking Locations
(3)Spare Tire Service Jack Lifting Locations and Optional Vehicle Jacking Locations
(4)Optional Floor Jack Lifting Locations

Vehicle Lifting -- Suspension Contact Hoist

Front Lift

Position the suspension contact front lift under the front tire and wheel assemblies.

Rear Lift

Position the suspension contact rear lift under the rear tire and wheel assemblies.

Vehicle Jacking

When you are lifting the vehicle with a vehicle jack or a service jack, block the wheels at the opposite end from which you are lifting. Use jack stands to provide additional support.