GM Service Manual Online
For 1990-2009 cars only

DTC Descriptor

This diagnostic procedure supports the following DTC:

DTC B0023 Door Lock Motors Circuit

Conditions for Setting the DTC

DTC 23 sets when the door locks have been activated 10 times in rapid succession. Once activated the door locks will time out for a period of 32 seconds.

Step

Action

Yes

No

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

2

  1. Connect a scan tool to the data link connector (DLC).
  2. Turn the ignition to ON.
  3. Verify the DTC is set.
  4. Wait 32 seconds. Do not operate the door locks during this time.
  5. Use the scan tool to clear the DTC code.

Does the DTC reset?

Go to Symptoms - Doors

System OK