NEW PARK BRACKET BOLTS (LONGER IN LENGTH)

VEHICLE APPLICATIONS: 1990 A,J,L,N,W CARS 1990 U-VAN TRUCKS

Bulletin Covers:

New Park Bracket Bolts (712) which are longer in length. Refer to (Figure 1)

DATE OF PRODUCTION CHANGE:

These new bolts went into production October 26, 1989 (Julian Date 9299) for all Windsor built HYDRA-MATIC 3T40 (THM 125C) transaxles and December 20, 1989 (Julian Date 9354) for all Willow Run built HYDRA-MATIC 3T40 (THM 125C) transaxles.

Implementation date for the HYDRA-MATIC 3T40-A (THM A-1) will be January 15, 1990 (Julian Date 9015).

SERVICE PARTS INFORMATION:

Refer to the following part number when ordering these new bolts.

Part Number Description ----------- ----------- 11500918 Bolts, Park Bracket M8 x 1.25 x 25

Parts are currently available from CANSPO.

SERVICE MANUAL REFERENCE:

When servicing any HYDRA-MATIC 3T40 transaxle, refer to the (MD9) Automatic Transaxle Unit Repair Section of your service manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.