SOME OWNERS MAY COMMENT ON CONDENSATION COLLECTING ON INSTRUMENT PANEL CLUSTER HOOD DURING HIGH HUMIDITY AND TEMPERATURE, WITH A/C ON HIGH AND WINDOW OPEN.
INSTRUMENT PANEL CLUSTER HOOD HAS AIR PASSED THROUGH RIGHT SIDE OF VEHICLE TO LEFT SIDE OF VEHICLE THROUGH A VENTING SYSTEM BUILT INTO THE INSTRUMENT PANEL CLUSTER HOOD. CONDENSATION FORMS FROM COLD A/C AIR PASSING THROUGH A WARM HOOD.
INSTALL A NEW INSTRUMENT PANEL CLUSTER HOOD WHICH IS WRAPPED WITH AN INSULATED VINYL. THIS NEW HOOD WILL IMPROVE THE CONDENSATION CONDITION.
1. REMOVE DRIVER SIDE AIR DEFLECTOR BY PULLING GENTLY REARWARD.
2. CAREFULLY PRY UPWARD WITH ROCKING MOTION ON LEFT AND RIGHT RETAINER CLIPS ON INSTRUMENT PANEL CLUSTER HOOD. HOOD ATTACHED WITH 7 RETAINER CLIPS.
3. INSTALL NEW INSTRUMENT PANEL CLUSTER HOOD, P/N 22658420.
P/N 22658420 INSTRUMENT PANEL CLUSTER HOOD
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE:
LABOR OPERATION NUMBER: C2450 LABOR OPERATION TIME: 0.2 HR
FIGURES: 00 ATTACHMENTS: 00
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1996 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.