1993-94 HYDRA-MATIC 4T60-E (RP0 M13)
3BHW, 4AFW, 4BLW, 4CLW 4CWW, 4PBW, 4PHW, 4WBW, 4WSW WITH A STRUCTURAL (CAST ALUMINUM) SIDE COVER PAN, AND TRANSAXLE CASE I.D. 723
CONDITION: (FIGURE 1 AND 2) SOME OWNERS MAY EXPERIENCE AN AUTOMATIC TRANSAXLE FLUID LEAK BETWEEN THE STRUCTURAL SIDE COVER PAN AND TRANSAXLE CASE.
CAUSE: (FIGURE 3) A CASTING CHANGE WAS IMPLEMENTED TO TRANSAXLE CASE I.D. 723 WHICH REDUCED THE THICKNESS OF A SECTION OF CASE WALL AFFECTING THE SIDE COVER GASKET'S SEALING ABILITY WHEN USED WITH A STRUCTURAL COVER PAN.
REPLACE THE ORIGINAL CASE SIDE COVER GASKET WITH A NEW REPLACEMENT SERVICE GASKET. THE REPLACEMENT GASKET LISTED BELOW SHOULD ONLY BE USED ON 1993-94 4T60-E TRANSAXLES THAT CONTAIN A STRUCTURAL SIDE COVER PAN, CASE I.D. 723 AND AN EXTERNAL SIDE PAN LEAK.
SERVICE PART INFORMATION:
PART NUMBER DESCRIPTION MODELS
8651940 GASKET KIT, SIDE 3BHW,4AFW COVER PAN 4BLW,4CLW (CASE I.D. 723) 4CWW,4PBW 4PHW,4WBW 4WSW
PARTS ARE EXPECTED TO BE AVAILABLE ON JANUARY 10, 1994.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: K6540 USE PUBLISHED LABOR OPERATION TIME.
FIGURES: 3
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER." THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS OCCURRING ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1994. GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.