1997 CHEVROLET AND GMC G VAN 1994-97 CHEVROLET AND GMC S/T MODELS 1994-97 OLDSMOBILE BRAVADA
THIS BULLETIN IS BEING ISSUED TO REVISE THE CLEANING PROCEDURE FOR WIPER DRIVE SHAFT KNURLS IN SECTION 8E (PASSENGER CARS) AND 8E1 (TRUCKS) OF THE SERVICE MANUAL.
PLEASE UPDATE THE PROCEDURE IN THE APPROPRIATE SERVICE MANUALS AS FOLLOWS:
FIGURE 1
KNURLS OF THE WIPER TRANSMISSION DRIVE SHAFT MUST BE CLEANED WHEN WIPER ARM IS REMOVED.
CLEAN KNURLS OF TRANSMISSION DRIVE SHAFT WITH A SUITABLE WIRE BRUSH.
DO NOT USE J 6627-4 FOR REMOVAL OF WIPER ARMS. VEHICLE PAINT WILL BE SCRATCHED IF USE OF THIS TOOL IS ATTEMPTED. USE A SUITABLE BATTERY TERMINAL PULLER FOR REMOVAL OF WIPER ARMS. (SEE FIGURE 2).
FIGURES: 02 ATTACHMENTS: 00
FIGURE 1 1. KNURLS
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1997 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.