Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry System Check? | -- | Go to Step 2 | |
2 | Using a fused jumper, connect RKE Module connector C1, terminal S, to ground. Do the interior lamps light? | -- | Go to Step 3 | |
3 | Inspect CKT 156 and CKT 1732. Refer to Interior Lights Schematics in Lighting Systems. Did you find and repair a condition? | -- | -- |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry System Check? | -- | Go to Step 2 | |
2 | Using a fused jumper, connect RKE Module connector C1, terminal G, to battery voltage. Does the rear compartment lid release open? | -- | Go to Step 3 | Go to Step 4 |
3 | Inspect CKT 56. Did you find and repair a condition? | -- | Go to Step 5 | Go to Step 4 |
4 | Replace the rear compartment lid release solenoid. Is the replacement complete? | -- | Go to Step 5 | -- |
5 | Inspect for continuity at RKE Module connector C1, terminal K, with the transaxle in PARK or NEUTRAL (Automatic Transaxle) or with the park brake set (Manual Transaxle). Is continuity present? | -- | Go to Step 7 | Go to Step 6 |
6 | Inspect the relevant circuit. Refer to Keyless Entry Schematics . Did you find and repair a condition? | -- | Go to Step 7 | -- |
7 | Measure the voltage at RKE Module connector C1, terminal J with the ignition switch in RUN. Is the voltage present? | -- | Go to Step 8 | |
8 | Inspect CKT 39. Did you find and repair a condition? | -- | -- |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry System Check? | -- | Go to Step 2 | |
2 | Using a fused jumper, connect RKE module connector C1, terminal A, to battery voltage. Does the driver's door unlock? | -- | Go to Step 5 | Go to Step 3 |
3 | Inspect CKT 694 and CKT 295. Did you find and repair a condition? | -- | Go to Step 5 | Go to Step 4 |
4 | Replace the left front door lock motor. Is the replacement complete? | -- | Go to Step 5 | -- |
5 | Measure the voltage at RKE module connector C1, terminal B, with either door lock switch held in the unlock position. Is the voltage present? | -- | Go to Step 7 | Go to Step 6 |
6 | Inspect CKT 194. Did you find and repair a condition? | -- | Go to Step 7 | -- |
7 | Measure the voltage at RKE module connector C1, terminal E. Is the voltage present? | -- | Go to Step 9 | Go to Step 8 |
8 | Repair the open in CKT 40. Is the repair complete? | -- | Go to Step 9 | -- |
9 | Using a fused jumper, connect RKE module connector C1, terminal G, to battery voltage. Does the rear compartment lid release open? | -- | Go to Step 10 | Go to Step 11 |
10 | Inspect CKT 56. Did you find and repair a condition? | -- | Go to Step 12 | Go to Step 11 |
11 | Replace the lid release solenoid rear compartment. Refer to Rear Compartment Lid Lock Cylinder Replacement in Body Rear End. Is the replacement complete? | -- | Go to Step 12 | -- |
12 | Using a fused jumper, connect RKE module connector C1, terminal S, to ground. Do the interior lamps light? | -- | Go to Step 14 | Go to Step 13 |
13 | Inspect CKT 156 and CKT 1732. Refer to Interior Lights Schematics in Lighting Systems. Did you find and repair a condition? | -- | Go to Step 14 | -- |
14 | Measure the voltage at RKE module connector C1, terminal R, with either door lock switch held in the lock position. Is the voltage present? | -- | Go to Step 16 | Go to Step 15 |
15 | Inspect CKT 195. Did you find and repair a condition? | -- | Go to Step 16 | -- |
16 | Inspect for continuity at RKE module connector C1, terminal N. Is continuity present? | -- | Go to Step 18 | Go to Step 17 |
17 | Inspect CKT 150. Did you find and repair a condition? | -- | Go to Step 18 | -- |
18 |
Is continuity present in the first case, and an open circuit present in the second case? | -- | Go to Step 20 | Go to Step 19 |
19 | Inspect CKT 1455. Did you find and repair a condition? | -- | Go to Step 20 | -- |
20 | Inspect for continuity at RKE module connector C1, terminal K, with the transaxle in PARK or NEUTRAL (Automatic Transaxle) or the park brake set (Manual Transaxle). Is continuity present? | -- | Go to Step 22 | Go to Step 21 |
21 | Inspect the relevant circuit. Refer to Keyless Entry Schematics . Did you find and repair a condition? | -- | Go to Step 22 | -- |
22 | Measure the voltage at RKE module connector C1, terminal J. Is the voltage present? | -- | Go to Step 23 | |
23 | Inspect CKT 39. Did you find and repair a condition? | -- | -- |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry System Check? | -- | Go to Step 2 | |
2 |
Did you find and repair the condition? | -- | Go to Step 3 | |
3 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | -- |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry System Check? | -- | Go to Step 2 | |
2 |
Did you find and repair the condition? | -- | Go to Step 3 | |
3 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | -- |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry System Check? | -- | Go to Step 2 | |
2 | Using a fused jumper, connect RKE module connector C1, terminal A, to battery voltage. Does the driver's door unlock? | -- | Go to Step 4 | Go to Step 3 |
3 | Inspect CKT 694 and CKT 295. Did you find and repair a condition? | -- | Go to Step 4 | |
4 | Replace the left front door lock motor. Is the repair complete? | -- | -- |
