Removal Procedure
- Remove the outer belt sealing strip (1)
on the door:
| 1.1. | Press the ratchet on the retainer (3) at the rear of the
sealing strip (1). |
| 1.2. | Lift to disengage the retainer (3). |
- Pull up on the sealing strip in order to release the strip from
the clips (2).
- Slide the sealing strip back in order to disengage the strip from
the front of the door window frame molding.
- Remove the sealing strip clips (2).
Installation Procedure
- Install the clips (2) to the outer belt
sealing strip (1) on the door.
- Slide the front of the sealing strip into the door frame molding.
- Align the sealing strip clips (2) to the slots in the door.
Engage the strip by pushing down until you hear an audible snap at each clip.
