Removal Procedure
- Remove the sunroof in
the vent position, and the sunshade (2) in the open position.
- Using a flat blade tool, disengage the left front sunshade guide (3)
by pushing the guide toward the middle of the car in order to overcome the
spring pressure.
- Slide the sunshade (2) to the closed position. Disengage
the left rear sunshade guide (3) in the same manner.
- Pull the sunshade (2) towards the left side of the vehicle
in order to disengage the right side guides (3). Then pull the sunshade
out between the glass panel and the roof.
- Remove the sunshade handle (4) from the sunshade (2)
by compressing the back side of the handle (4) together and sliding
the handle out.
Installation Procedure
- Install the sunshade handle (4)
into the sunshade (2) pressing into place until the tabs seat behind
the sunshade.
- Install the sunshade (2) into the vehicle between the roof
and the glass panel.
- With the sunshade closed, position the right side sunshade guides (3)
to the guide rail.
- Using a flat blade tool, engage the left rear sunshade guide (3)
to the guide rail.
- Slide the sunshade to the open position. Engage the left front
sunshade guide (3) to the guide rail.