Did you perform the Hydraulic Brake Diagnostic System Check?

--

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check .

Inspect the disc brake pads and brake shoe linings for the following conditions:

Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes.

Did you find a condition?

--

Go to Step 3

Go to Step 4

Replace the brake linings. Refer to the following procedures:

Did you complete the repair?

--

Go to Hydraulic Brake Diagnostic System Check .

--

Inspect the brake rotors for the following conditions:

Refer to Brake Rotor Lateral Runout Check .

Did you find a condition?

--

Go to Step 5

Go to Step 6

1. Refinish the brake rotor. Refer to Brake Rotor Refinishing in Disc Brakes.
2. If refinishing the brake rotor results in a thickness that is less than the thinnest (refinishing) thickness, replace the rotor. Refer to Front Brake Rotor Replacement or Rear Brake Rotor Replacement in Disc Brakes.

Did you complete the repair?

--

Go to Hydraulic Brake Diagnostic System Check .

--

Inspect brake assembly for loose, broken, or missing components. Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes.

Did you find a condition?

--

Go to Step 7

Go to Step 8

Tighten or replace the loose, broken or missing brake assembly components. Refer to the following procedures:

Did you complete the repair?

--

Go to Hydraulic Brake Diagnostic System Check .

--

Verify proper brake system operation.

Does the original condition still exist?

--

Go to Step 1

System OK