SMU - Revised Brake Specifications
| Subject: | Revised Brake Specifications |
| Models: | 1997-2002 Chevrolet Malibu |
| 1997-1999 Oldsmobile Cutlass |
| 1999-2002 Oldsmobile Alero |
| 1997-2002 Pontiac Grand Am |
This bulletin is being issued to revise various brake specifications in the Hydraulic Brakes sub-section and the Disc Brakes sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI2000. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Procedure and Sub-Section | Corrected Information | SI Document ID |
|---|---|---|
Brake Rotor Lateral Runout Check - Disc Brakes | TIR Specification is .04 mm (.0015 in) | 181511 487627 317686 529206 526554 |
Maximum Lateral Runout Specification is .04 mm (.0015 in) | 492391 174340 | |
Brake System Specifications - Hydraulic Brakes | Maximum Lateral Runout Specification is .04 mm (.0015 in) Thickness Variation is .025 mm (.001 in) | 247129 208082 483287 317595 529077 526472 |
Disc Brake Component Specifications - Disc Brakes | Maximum Lateral Runout Specification is .04 mm (.0015 in) Thickness Variation is .025 mm (.001 in) | 487621 412148 529174 526547 687160 687908 |
Disc Brake Component Specifications - Disc Brakes | Revised Information Thickness variation is .02 mm (.001 in) Maximum Lateral Runout Specification is .04 mm (.0015 in) | 865217 |
Brake Rotor Surface Wear and Inspection - Disc Brakes | Revised Information Thickness variation is .02 mm (.001 in) Maximum Lateral Runout Specification is .04 mm (.0015 in) | 866998 865152 |
Brake Rotor Surface Wear and Inspection - Disc Brakes | Revised Information Thickness variation is .02 mm (.001 in) Maximum Lateral Runout Specification is .04 mm (.0015 in) | 867899 |
