Run the engine at idle and position the transaxle in NEUTRAL.
Depress the brake pedal and hold a constant foot pressure. If the pedal gradually
falls away with the constant pressure, the hydraulic system may be leaking.
Perform the following visual inspection in order to confirm any suspected
leak:
| • | Inspect the master cylinder fluid levels. Normal lining wear may
cause slight drop in the reservoir fluid level. An abnormally low reservoir
fluid level, causing illumination of the BRAKE warning lamp, may indicate
a leak in the system. The hydraulic system may leak either internally or
externally. Refer to
Master Cylinder Diagnosis
. |
| • | Inspect for leaks at the brake pipe and brake hose connections.
If leakage exists, verify the torque of the fasteners and/or replace the pipe
or hose. |
| • | Inspect the connecting brake components for damage. Recondition
or replace the connecting brake components as necessary. |
| • | Inspect the caliper and wheel cylinder boots for leakage. If leakage
is evident, recondition or replace the components as necessary. Refer to the
following procedures: |
