Application | Specification | |
---|---|---|
Metric | English | |
Brake Drums | ||
Inside Diameter New | 225.25 mm | 8.868 in |
Maximum Allowable Radial Runout | 0.104 mm | 0.004 in |
Maximum Diameter After Refinish | 225.78 mm | 8.889 in |
Discard Diameter * | 226.31 mm | 8.909 in |
Front Brake Rotors | ||
| 278.0 mm | 10.944 in |
| 0.04 mm | 0.0015 in |
| 0.025 mm | 0.001 in |
| 26.2 mm | 1.031 in |
| 24.9 mm | 0.980 in |
| 24.7 mm | 0.972 in |
Rear Brake Rotors | ||
| 278.0 mm | 10.944 in |
| 0.04 mm | 0.0015 in |
| 0.025 mm | 0.001 in |
| 11.0 mm | 0.433 in |
| 9.85 mm | 0.388 in |
| 9.0 mm | 0.354 in |
Front Caliper Bore Diameter | 60.0 mm | 2.36 in |
Rear Caliper Bore Diameter | 38.0 mm | 1.50 in |
Master Cylinder Bore Diameter | 25.40 mm | 1.00 in |
Wheel Cylinder Bore Diameter | 22.20 mm | 0.87 in |
* All brake drums and rotors have a discard dimension cast into them. Replace any drum or rotor that does not meet this specification. After refinishing the drum or rotor, replace any drum or rotor that does not meet the maximum diameter or minimum thickness after refinish specification. |