Removal Procedure
Notice: Vacuum check valve and grommet can be inspected and/or serviced without
removing the booster from the vehicle.
- Disconnect the vacuum
hose (1) from the vacuum booster check valve.
- Remove the vacuum booster
check valve (1) and grommet.
- Inspect the grommet for the following conditions.
Replace the grommet if any of the conditions are found:
- Clean the above parts in clean denatured alcohol.
- Dry with unlubricated compressed air.
Installation Procedure
Important: Lubricate the inside and outside diameters of the grommet and the front
housing seal with a thin layer of silicone grease.
- Install the vacuum booster
check valve (1) and grommet.
- Connect the vacuum hose (1)
to the vacuum booster check valve.