GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Grand Am 🢒 Brakes 🢒 Antilock Brake System 🢒 Rear Wheel Speed Sensor Wiring Harness Replacement

Removal Procedure

    Object Number: 165916 Size: SH
  1. Raise and support the vehicle on a suitable hoist. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the two rear wheel speed sensor electrical connectors from the rear wheel bearing and speed sensor assemblies.

    3. Object Number: 398934 Size: SH
  3. Disconnect the rear wheel speed sensor harness electrical connector (3) from the body connector.

    4. Object Number: 398930 Size: SH
  4. Remove the rear wheel speed sensor harness retainers.
  5. Remove the rear wheel speed sensor harness (1) from the vehicle.

Installation Procedure

    Object Number: 398930 Size: SH
  1. Install the rear wheel speed sensor harness (1) to the vehicle.
  2. Install the rear wheel speed sensor harness retainers.

    3. Object Number: 398934 Size: SH
  3. Connect the rear wheel speed sensor harness electrical connector (3) to the body connector.

    4. Object Number: 165916 Size: SH
  4. Connect the two rear wheel speed sensor electrical connectors to the rear wheel bearing and speed sensor assemblies.
  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  6. Perform the Diagnostic System Check - ABS .