Removal Procedure
- Remove the split/folding rear seat back. Refer to
Rear Split Folding Seat Back Replacement
.
- Disconnect hook and loop strip retaining the rear seat cushion
cover back and pull back to access the staples.
- Remove the staples from the cushion cover back.
- Reach inside of the rear seat back cover in order to unfasten
the hook and the loop retainers securing the rear seat back cover to the pad.
- Remove the rear seat back cover from the seat back, by pulling
the seat back cover up and over the pad.
Installation Procedure
- Position the rear seat back cover alignment mark to the alignment
mark on the pad.
- Install the hog rings to the rear seat back cover to the pad.
- Pull the seat back cover over the pad and alining the hook and
the loop retainers.
- Use firm hand pressure in order to fasten the hook and the loop
retainers, securing the rear seat back cover to the pad.
- Install new staples to the cushion cover back.
- Use firm hand pressure in order to fasten the hook and the loop
retainer on the seat back.
- Install the split/folding rear seat back. Refer to
Rear Split Folding Seat Back Replacement
.