Modes of Operation
Automatic Door Locks (Manual Trans)
The following are the modes of operation for the automatic door locks
feature:
| | All of the doors lock when the vehicle speed exceeds 8 km/h (5 mph).
All of the doors will unlock when the transaxle is shifted into REVERSE (R)
and the key is turned to OFF. |
| | Mode 2: if equipped with RKE |
| | All of the doors lock when the vehicle speed exceeds 8 km/h (5 mph).
Only the driver door unlocks when the transaxle is shifted into REVERSE (R)
the key is turned to OFF. |
| | All of the doors lock when the vehicle speed exceeds 8 km/h (5 mph).
No automatic door unlock. |
| | No automatic door lock or unlock. |
Automatic Door Locks (Automatic Trans)
The following are the modes of operation for the automatic door locks
feature:
| | All of the doors lock when the vehicle is shifted out of PARK. All of
the doors unlock when the vehicle is shifted into PARK and the key is turned
to OFF. |
| | All of the doors lock when the vehicle is shifted out of PARK. Only
the driver door unlocks when the vehicle is shifted into PARK and the key
is turned to OFF. |
| | All of the doors lock when the vehicle is shifted out of PARK. No automatic
door unlock. |
| | The automatic door lock feature is disabled. |
Programming Features
Enter Programming
To enter the programming mode, perform the following actions:
- On a vehicle with a manual trans, place the trans in REVERSE.
Apply the park brake.
- Close all of the doors.
- Turn the ignition to the RUN position.
Automatic Door Locks
Continue with the following steps in order to personalize the automatic
door locks:
- Press hold the LOCK button on the power door lock switch for 10
seconds. The vehicle will chime with the number of chimes corresponding to
the current mode. Refer to Automatic Door Locks modes.
- Press and hold the LOCK button on the power door lock switch for
10 seconds again in order to advance to the next mode. The vehicle
will chime with the number of chimes corresponding to the mode.
- Continue to press and hold the LOCK button on the transmitter
until the desired mode is reached.
Remote Activation Verification
Continue with the following steps in order to personalize the horn for
the remote activation verification feature:
- Press and hold the power door lock switch in the UNLOCK position
for 10 seconds. The horn will chirp when the horn setting for the
remote activation verification has changed between disable and enable.
- Press and hold the power door lock switch in the UNLOCK position
for 10 seconds again to change the horn setting back to the original setting.
The horn will chirp when the horn setting for the remote activation
verification has changed.
Exit Programming
Any of the following list of events will cause the programming sequence
to be terminated:
| • | The ignition is moved from the RUN position. |
| • | The vehicle is shifted out of REVERSE for vehicles with a manual
trans. |
| • | The park brake is released for vehicles with a manual trans. |
Chime Level Adjustment
In order to adjust the chime level, perform the following steps:
- Turn the ignition ON.
- Turn the radio OFF.
- Press and hold the radio push-button 6 until either LOUD
or NORMAL appears on the radio display. The chime sounds 3 times for
each volume change.
- To toggle the setting, press and hold the radio push-button 6
again.
Additional Information
For more information on the personalization features, refer to one of
the following description and operations:
