- Remove the turbine shaft
to drive sprocket snap ring (35).
- Remove the drive sprocket (37) from the turbine shaft (39).
- Remove the three Teflon seals (33 and 40) from the turbine
shaft.
- Discard the Teflon seals (33 and 40).
- Inspect the drive sprocket
(37) , the driven sprocket (91) , the drive link assembly (36), and the turbine
shaft (39) for damage or excessive wear.
- Inspect the seal grooves for damage.
- Inspect the thrust washers for damage or excessive wear.
- Clean and dry each of the components.