Rear Side Door Check Link Replacement for Pontiac Grand Am 2003

1. Remove rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
2. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .



3. Remove the check link bolt from the center pillar.



4. Remove the rear door check link grommet (3).
5. Remove the check link nuts (2).
6. Remove the check link from the door.

1. Position the check link in the rear door.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the rear door check link nuts (2).

Tighten
Tighten the door check link to door nuts to 10 N·m (89 lb in).

3. Install the rear door check link grommet.



4. Install the front door check link to the hinge pillar bolt.

Tighten
Tighten the door check link to pillar bolt to 9 N·m (80 lb in).

5. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
6. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .