Removal Procedure
- Remove the instrument panel cluster. Refer to
Instrument Cluster Replacement
- Remove the instrument panel cluster rear
cover using a small flat bladed tool in order to release the retainer tabs.
- Disconnect the required lamp from the
cluster turning counterclockwise.
- Remove the lamp from the cluster
- Remove the bulb from the lamp socket,
by pulling out.
Installation Procedure
- Install the bulb to the lamp socket pressing
into place until fully seated.
- Install the required lamp to the cluster.
- Connect the required lamp to the cluster
turning clockwise.
- Install the instrument panel cluster
rear cover pressing into place until fully seated.
- Install the instrument panel cluster. Refer to
Instrument Cluster Replacement