Important: Be advised to repair one rear drum brake shoe assembly at a time. This
enables you to use the other drum brake shoe assembly for visual reference.
Remove the adjuster spring.
Use the J 38400
(1) to spread the top of the
brake shoes to remove the adjuster assembly (2) and the adjuster lever
from the brake shoe.
Position the hook end
of the J 38400
(1)
under the universal spring and lightly pull the universal spring end out
of the shoe web hole. Hold the universal spring while removing the brake
shoe.
Position the hook end
of the J 38400
(1)
under the universal spring and lightly pull the universal spring end out
of the shoe web hole. Hold the universal spring while removing the brake
shoe.
Disconnect the park brake lever from the brake shoe by removing
the retaining clip.
Connect the park brake lever to the brake shoe and install the
retaining clip.
Position the
hook end of the J 38400
(1)
under the universal spring and lightly pull the universal spring end out
while installing the brake shoe. Ensure that the universal spring properly
engages the brake shoe web hole.
Position the hook end
of the J 38400
(1)
under the universal spring and lightly pull the universal spring end out
while installing the brake shoe. Ensure that the universal spring engages
the brake shoe web hole.
Use the J 38400
(1) to spread the top of the
brake shoes to install the adjuster assembly (2) and the adjuster
lever to the brake shoe.